Ten Major Benefits of Modular Homes.
Modular involves constructing building components offsite and at a secure facility, then transporting the materials and units for assembly on the job site. While on the job site, trade contractors assemble units and hand over buildings to their new owners. This process eliminates the need for traditional “stick-building” construction and, among many benefits, reduces waste. In addition, as the raw materials are built offsite and shipped partially assembled or assembled, modular can substantially reduce the cost of labor, time, and materials on almost any project.
For decades, modular had a perception issue because it was primarily a low-mass development method. Today, modular is rapidly becoming a “must-do” in the construction industry for its incredible benefits. While we’re positive there are many more, here are the Top 10 Benefits of Modular in Construction:
A FEMA study found that after Hurricane Andrew in Florida in 1992, modular homes withstood the hurricane better than other home construction techniques:
“Overall, relatively minimal structural damage was noted in modular housing developments. The module-to-module combination of the units appears to have provided an inherently rigid system that performed much better than conventional residential framing. This was evident in both the transverse and longitudinal directions of the modular buildings.”
1. Better Security and Safety
Construction is a hazardous industry, so trade contractors must always be dedicated to implementing safer processes. With modular, there is less risk from environmental hazards because staff utilize sub-assembly workflows in factory-like and controlled facilities. Today, engineering, and modular materials have improved to build assemblies and structures as strong as traditional structures.
On job sites, trade contractors are susceptible to weather-related health risks, such as falls, etc., but working in a controlled environment ensures increased safety standards compared to the job site. In addition, strict factory procedures and processes help reduce accidents and injuries. For example, changing job site conditions due to changing weather, ground, human movement, excessive activities, etc., still have higher employee risk rates. However, this is reduced when workers' time is on the job site, and the number of activities is substantially reduced.
2. Modular is Cost-Effective
Materials and labor are not getting cheaper as the construction industry experiences increasing costs annually, challenging profit margins each year for trade contractors. In addition, weather delays and longer working hours increase the demand for labor and materials, that drives the price up for both. However, modular offsets these rising costs through construction deployment and process improvements.
The McLaren Greater Lansing Hospital project is a perfect use case for demonstrating modular cost savings. The staffing in the fabrication shop included just 14 people for all trades, resulting in a 30% reduction in trade labor on the job site to install the racked systems. Installing the racked systems in the building took about an hour per rack, totaling 220 hours. “The 2-month schedule savings resulted in a $5.6 million direct return to the owner. In addition, two months of unexpected operational time for the healthcare facility can mean an indirect revenue impact of $60M. Mark Lamberson CPD, National VDC Manager, Limbach
3. Advanced Technology Trends & Industry Impacts
Innovations in construction technology and forward-thinking Construction firms have reinvented modular and modularization. BIM (Building Information Modeling), Fab Shop production tracking, and Field coordination tech are helping construction projects achieve higher economic, environmental, and sustainability levels. In addition, optimizing construction delivery processes (e.g., lean construction) and integrating technology in the fab shop can help leaders visualize production, material, and labor costs on each project, assisting companies in optimizing and reducing costs.
4. Modular Offers Flexible Solutions
Modular offers much more flexibility for workers to disassemble and relocate sub-assemblies to different job sites, making the most of readily available material. Owners and GCs also see modular construction methods as viable solutions because creative design restraints and lack of flexibility are no longer barriers.
5. Increased Quality Control & Consistency
Modular construction is built and delivered using a controlled environment with manufacturing processes that are standardized, repeatable, and uniform to increase quality assurance and control. With standard quality checks throughout the build cycle, the process is significantly more consistent than building on job sites where workers will require multiple skill levels (specialists, installers, etc.) and be exposed to traditional challenges (e.g., overlapping trades, planning mistakes, weather, delivery errors, broken materials, labor down time, etc.)
6. Modular Offers Substantial Time Savings
With Modular, countless projects and studies demonstrate time savings compared to traditional on-site construction. With more precise planning, simultaneous multi-trade assemblies, and the removal of the impact of weather, project schedules can be accelerated, as reported in the McLaren Greater Lansing Hospital project. Shorter delivery times can also enable construction firms to take on more projects at once to scale and achieve even higher growth.
7. Environmental-Friendly Construction
Compared to traditional construction methods, modular construction is more eco-friendly in the short- and long-term. Traditional construction requires more bulk materials, which produces substantial material waste on every job site. Material waste goes directly to landfills, whereas modular materials are typically recycled. Also, modular construction opens up opportunities for “just-in-time” material ordering, which reduces waste and costs. As a result, busy job sites with heavy dust and frequent community disruptions (traffic, closures, etc.) are minimized. In addition, a fabrication shop's controlled environment allows for better air filtration and wall insulation, which directly increases energy efficiency.
8. Modular Produces Much More Durable Materials
Commonly used materials (steel, concrete, wood, PVC, etc.) for modular are much more durable and efficiently delivered to the job sites. As a result, modular materials avoid issues (e.g., rust) commonly found in traditionally constructed materials on the job site.
9. Accelerating Project Schedule Certainty
According to a McKinsey Report, when a project involves pre-assembled framing or slotting pre-manufactured cassettes, construction schedules may be reduced by up to 50% compared to traditional stick-building processes. In addition, modular offers construction firms much more confidence in delivering projects on time because adopting manufacturing workflows productizes deliverables and eliminates many common issues that delay projects.
10. Optimizes Workforce
Fewer staff and managers overseeing job site construction teams are necessary for assembling components at the job site. Accelerated schedules and shorter timelines are easier to plan and more accurate. Fewer delays are likely to impact labor scheduling, and reducing communication errors is another benefit.
Conclusion
Modular construction is continuing to innovate and achieve considerable project success. Companies that approach it methodically using the right resources and technology will increase productivity, cost savings, and competitiveness. It also provides the end-users with substantial benefits. It’s time to adopt modular in construction.